Robust CCS900

The Trimble CCS900 Compaction Control System helps you accurately control the compaction process, while reducing unnecessary passes that result in over compaction.

The early detection of unsuitable materials and hidden obstructions can be excavated and re-graded or compacted prior to more costly phases of the construction process. Compaction results are recorded and stored for analysis and generation of documentation deliverables at the end of the project.

Easy CCSFLEX

The Trimble CCSFlex Compaction Control System for Soil Compactors is the ideal solution for temporary installations or rented machines. The CCSFlex “in a case” system provides pass count mapping for soil compactors and is easy-to-use; you can operate without a GPS base station and without 3D design data.

Compaction Monitoring

Supervisors and quality managers can monitor compaction activities using the optional in-cab printer or the web-based VisionLink fleet, asset and productivity solution from Trimble.

The VisionLink 3D Project Monitoring subscription can be used to:

  • Continuously monitor pass counts and Compaction Meter Values (CMV) over the entire area and on all material layers
  • Improve testing success, reduce rework and lower ongoing maintenance costs
  • Reduce over-compaction to optimize fuel use and machine time
  • Ensure uniform lift, consistent pass counts and target compaction meter values to increase the surface quality and operational life

You can install CCS900 to improve your soil compaction operations on any project where the specification calls for a target density or pass count, including:

  • Highway and railway construction
  • Residential pads
  • Commercial site construction
  • Parking lots
  • Sports fields

The Trimble CCS900 Compaction Control System is the premium system for improving soil compaction operations and rolling a more efficient surface.  It is available in the following configurations:

Single GNSS

Measures the position and slope of the blade and compares that to design data for rough grading and mass excavation on complex design surfaces

Dual GNSS

Measures the exact position, cross slope and heading of the blade for rough grading and mass excavation on steep slopes and complex design surfaces

Universal Total Stations

Total station-based system for high accuracy lift and layer control, material placement and monitoring, or for jobs where GNSS is not the ideal solution because of overhead obstructions

Integrates With

VisionLink Unified Suite

No matter what your operational needs are, VisionLink Unified Suite applications can help you reduce costs and increase efficiency. VisionLink offers a unified view of health, location and productivity for your fleet, regardless of manufacturer.

Grade Control for Motor Graders

Finished grade with fewer passes. Place material faster and with millimeter accuracy. With GCS900 on your grader you’ll keep costs to a minimum and realize better profits.

Grade Control for Dozers

Better blade control. Faster operating speed. Only GCS900 with GradeMax Plus lets you grade higher quality surfaces 35-40% faster, in any material type.